Complete your JZA80 Toyota Supra project in style with these genuine OEM tail lights.

These tail light units suit 'face lift' versions of the JZA80 Toyota Supra built 1995 to 2002.

Ideal for a giving your JZA80 Toyota Supra a 'make-over', maintaining road worthiness, for the complete genuine resto or keep a pair 'just in case'.

Sold as a pair, they will look great on a detailed restoration, retro ride, resto mod, drift machine or every day driver.

Shipping worldwide every week - no problems for international buyers.

Genuine 7mm Eagle Leads to suit your AW11 Toyota MR2 built from 1984 to 1989 

Suits  1.6L 4A-GE and 4A-GZE (Supercharged) DOHC 16V Fuel Injection models of the AW11 Toyota MR2.

Does not suit AW10 with 3A-LU engines.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Complete your SW20 MR2 project in style and improve handling and performance.

Ideal for street and track with a gain of up to 15% increased stiffness over factory sized bars.

Comes complete with bushes, brackets, links and lateral locks.

Toyota Heritage sway bars are Australian made, adjustable and powder coated to the highest standards.

The standard size bar we offer for the SW20 is 20mm powder coated red.

We offer the opportunity for buyers to custom their bar by selecting 'Custom' in the drop down menu 'Bar Selection'.

We ship wordlwide weekly - no problems for overseas buyers.

Genuine 5mm Eagle Leads to suit your SW20 Toyota MR2 built from November 1993 onwards.

Suits 2.0L 3S-GE DOHC 16V Fuel Injection non-turbo models of the SW20 Toyota MR2 referred to as Rev 3, Rev 4 and Rev 5.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine 5mm Eagle Leads to suit your SW20 Toyota MR2 built from November 1991 to October 1993

Suits 2.0L 3S-GE DOHC 16V Fuel Injection non-turbo models of the SW20 Toyota MR2 referred to as Rev 2.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 5mm Leads to suit your SW20 Toyota MR2 Turbo built after November 1991. 

Our photo shows each of the boot and tube assemblies specific to this kit that suits the Toyota MR2 SW20 Turbo.

Suits 2.0L 3S-GTE DOHC 16V Fuel Injection Turbo models of the SW20 Toyota MR2 Turbo referred to as Rev 2+ Turbo, MR2 GT and MR2 GT-S.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Complete your SW20 MR2 project in style and improve handling and performance.

Ideal for street and track with a gain of up to 15% increased stiffness over factory sized bars.

Comes complete with bushes, brackets, links and lateral locks.

Toyota Heritage sway bars are Australian made, adjustable and powder coated to the highest standards.

The standard size bar we offer for the SW20 is 20mm powder coated.

We offer the opportunity for buyers to custom their bar by selecting 'Custom' in the drop down menu 'Bar Selection'.

We ship wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 7mm Leads to suit your ST165 Toyota Celica built from 1986 to 1989.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the ST165 Toyota Celica GT-Four.

Suits 2.0L 3S-GTE DOHC 16V Fuel Injection Turbo models of the ST165 Toyota Celica GT-Four and also referred to as Turbo All-Trac (USA).

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.