Toyota Corolla E10 Series Parts

Spare parts for Toyota Corolla's including KE10, KE11, KE15, KE16, KE17 and KE18 including Sprinters

Toyota Corolla and Sprinter E10 series front indicator lenses 1968 to 1970

Reproduction front indicator and parker light lenses to suit your E10 series (first generation) Toyota Corolla or Sprinter built between 1968 and 1970.

Suited to KE11, KE17 and KE18 Toyota Corolla and Sprinter models these lenses have been made in Australia to the highest quality and replace Koito original part 12-4R (right side) and 12-4L (left side).

Sold as a pair they will complete your first generation E10 series Toyota Corolla or Sprinter project in style - whether its a retro-ride, drift machine, restoration project, street registered or even a race car!

Shipping worldwide weekly - no problems for overseas buyers.

$95.00

Corolla E10 series Sedan and coupe tail light lenses KE10 KE11

Available in USDM and JDM / Rest of World versions. Suits KE10 and KE11 variants built from 1966 to 1968.

The red-amber-clear units are suited to the Japanese Domestic Market ('JDM') and Australian Market which included New Zealand and other South West Pacific nations (eg PNG).

The red-clear-red units are suited to the USA Domestic Market ('USDM') and were also used throughout north America in Canada and Mexico.

Corollas delivered to Europe and Latin America may use either version, depending on country and year.

Replaces original Koito parts L2377 (indicator top section amber or red), L2186 (oval shape reflector) and L2376 (red tail light and clear back-up light).

Complete your early model Corolla project in style - whether its a retro-ride, drift machine, restoration project or street registered!

These lenses have been produced in Australia to highest quality and are faithful reproduction items. It comes in three pieces; the indicator (amber or red), a reflector (red oval), stop light & reverse (red and clear section).

We ship worldwide every day and can ship anywhere.

 

$175.00
Out of stock
* usdm or jdm-rest of world:

Corolla E10 series Sprinter Quarter Vent seal RHS KE15 KE17

Sprinter Quarter Vent Window Seal (right hand side) for KE15 and KE17 models.

These seals have been made to the highest precision tooling and production standards. They are a two piece item and the upright section has the correct soft metal spine for correct installation.

Suitable for both left hand drive and right hand drive builds of these early Sprinters. Does not fit the KE10/11 Corolla though (as Sprinters had a 30mm lower roof line).

We currently have this seal fitted to the Toyota Heritage KE17 race car and we receive compliments of how well these seals have been made and finish off our car.

$80.00
Out of stock

Corolla E10 series Pair of Sprinter SL B-pillar Emblem KE17 KE15

Sprinter B-pillar Emblem for KE15 and KE17 models.

Note: this is for 'SL' variants only.

This is a faithful reproduction of the iconic emblem that tells the world your car is a Sprinter.

These have been made to the highest tooling and production standards.

$160.00
1 In Stock

Corolla E10 Series Front indicator lenses 1966 to 1967

Available in either clear or amber, this pair of front indicator and parker light lenses suits Toyota Corolla or Sprinter KE10, KE11, KE15, KE16, KE17 or KE18.

Used predominantly on Corolla and Sprinter manufactured between 1966 to 1967. The use of amber or clear units varies from country to country and by year.

Complete your early model Corolla or Sprinter project in style - whether its a retro-ride, drift machine, restoration project, street registered or even a race car!

These lenses have been produced to highest quality using precision tooling and are faithful reproduction items.

$65.00
* lense colour options:

Wagon tail light lenses

Available in USDM and JDM / Rest of World versions. Suits KE16 and KE18 variants built from 1966 to 1970.

The red-amber-clear units are suited to the Japanese Domestic Market ('JDM') and Australian Market which included New Zealand and other South West Pacific nations (eg PNG).

The red-clear-red units are suited to the USA Domestic Market ('USDM') and were also used throughout north America in Canada and Mexico.

Corollas wagons delivered to Europe and Latin America may use either version, depending on country and year.

Complete your early model Corolla wagon project in style - whether its a retro-ride, drift machine, restoration project or street registered!

These lenses have been produced in Australia to highest quality and are faithful reproduction items. It comes in two pieces; One section is the indicator (amber or red) with the stop light (red) and the clear reverse ('back-up') is a separate piece.

We ship worldwide every day and can ship anywhere.

 

$175.00
1 In Stock
* usdm or jdm-rest of world:

Corolla E10 series Pair of Sprinter B-pillar Emblem KE15 KE17

Sprinter B-pillar Emblem for KE15 and KE17 models.

Note: this is not for 'SL' variants.

This is a faithful reproduction of the iconic emblem that tells the world your car is a Sprinter.

These have been made to the highest tooling and production standards.

$120.00
9 In Stock

Corolla E10 Series Front Indicator Seal Late Models

Faithful reproduction of rubber seal that fits around the front indicator assembly for most early model Corolla and Sprinters, with 'large' indicator assemblies. Can be used on the full amber type and the split amber/white types of indicators.

These have been manufactured to the highest tooling and production standards to create a high quality precision faithful reproduction part.

We currently have this same badge fitted to the Toyota Heritage KE17 Race Car. They stop vibration, reduce corrosion and simply finish off your car very nicely.

Suitable for most first generation Corolla and Sprinter - KE10, KE11, KE15, KE16, KE17 and KE18

Price is for a single unit only. These are generic to both left and right side.

$25.00
Out of stock

Corolla E10 Front fender side marker amber 1968 to 1970

Pair of front fender indicator light lenses to suit your late series Toyota Corolla or Sprinter KE10, KE11, KE15, KE16, KE17 and KE18

Complete your late series 'E10' Corolla or Sprinter project in style - whether its a retro-ride, drift machine, restoration project, street registered or even a race car!

Our robust UV stable lenses are made in Australia, and have been produced to highest quality using precision tooling and are faithful reproduction items.

The original type lenses are not available any longer as NOS.

Avoid other cheap made versions of the lenses!

$30.00

Corolla E10 series Licence Plate Lamp Seal

Faithful reproduction of rubber seals that fits between the rear bumper bar and the licence plate lamp mounting plate on all early model Corolla and Sprinters.

These have been manufactured to the highest tooling and production standards to create a high quality precision faithful reproduction part.

We currently have this same seal fitted to the Toyota Heritage KE17 Race Car. They stop vibration, reduce corrosion and simply finish off your car very nicely.

Suitable for all first generation Corolla and Sprinter - KE10, KE11, KE15, KE16, KE17 and KE18

$20.00
10 In Stock

Corolla E10 Series Front fender side marker amber 1966 to 1968

Pair of front fender indicator light lenses to suit your early build Toyota Corolla or Sprinter KE10, KE15 and KE16

Complete your early series 'E10' Corolla or Sprinter project in style - whether its a retro-ride, drift machine, restoration project, street registered or even a race car!

Our robust UV stable lenses are made in Australia, and have been produced to highest quality using precision tooling and are faithful reproduction items.

The original type lenses are not available any longer as NOS.

Avoid other cheap made versions of the lenses!

$30.00
1 In Stock

Toyota 3K 4K Head Gasket Wide Fire Ring

Big Bore Head Gasket to suit your 3K or 4K high performance Toyota engine.

This custom made gasket uses a special wide fire ring to give better sealing when the engine is bored oversize 0.040" to 0.060" (1.0-1.5mm). The standard replacement head gaskets typically will not suit more then +040" overbore, and even if you find one that will, the metal reinforcing "fire ring" around the cylinder, is very thin and struggles to seal properly on high compression race engines. Standard gaskets typically fail between the cylinders when the bock is bored more than about 0.030".

Suitable for race, drift or road application. We currently run this gasket in the Toyota Heritage KE17 Sprinter Group Nc race car.

These are custom made upon ordering.

$235.00
1 In Stock

Corolla E10 Front fender side marker clear 1968 to 1970

Pair of custom type front fender indicator light lenses in clear to suit your late series Toyota Corolla or Sprinter KE10, KE11, KE15, KE16, KE17 and KE18.

Complete your late series 'E10' Corolla or Sprinter project in style - whether its a retro-ride, drift machine, restoration project, street registered or even a race car!

Our robust UV stable lenses are made in Australia, and have been produced to highest quality using precision tooling and are faithful reproduction items.

Must be used with amber bulbs. Vendor does not warrant regulatory compliance.

The original type lenses are not available any longer as NOS.

Avoid other cheap made versions of the lenses!

$45.00

Corolla E10 series Rear Bumper Bar Mount Rubber Seal KE10 KE11 KE15 KE16 KE17 KE18

Faithful reproduction of rubber seals that fit between the bumper and the steel mounting brackets (rear bumper) on all early model Corolla and Sprinters.

Sold as a pair.

These have been manufactured to the highest tooling and production standards to create a high quality precision faithful reproduction part.

We currently have these seals fitted to the Toyota Heritage KE17 Race Car. They stop vibration, reduce corrosion and simply finish off your car very nicely.

Suitable for all first generation Corolla and Sprinter - KE10, KE11, KE15, KE16, KE17 and KE18

$20.00
23 In Stock

Corolla E10 series Sprinter Quarter Vent seal LHS KE15 KE17

Sprinter Quarter Vent Window Seal (left hand side) for KE15 and KE17 models.

These seals have been made to the highest precision tooling and production standards. They are a two piece item and the upright section has the correct soft metal spine for correct installation.

Suitable for both left hand drive and right hand drive builds of these early Sprinters. Does not fit the KE10/11 Corolla though (as Sprinters had a 30mm lower roof line).

We currently have this seal fitted to the Toyota Heritage KE17 race car and we receive compliments of how well these seals have been made and finish off our car.

$80.00
Out of stock

Corolla E10 series Sprinter Boot (Trunk) Emblem KE15 KE17

Sprinter Boot Badge for KE15 and KE17 models.

This is a faithful reproduction of the iconic badge that tells the world your car is a Sprinter.

We currently have this badge fitted to our Toyota Heritage KE17 race car and receive compliments of how well this badge is made and finishes off the car.

These have been made to the highest tooling and production standards.

$100.00
7 In Stock

Corolla E10 series Sprinter tail light lenses KE15 KE17

Available in USDM and JDM / Rest of World versions. Suits KE15 and KE17 variants built from 1968 to 1970.

The red-amber-clear units are suited to the Japanese Domestic Market ('JDM') and Australian Market which included New Zealand and other South West Pacific nations (eg PNG).

The red-clear-red units are suited to the USA Domestic Market ('USDM') and were also used throughout north America in Canada and Mexico.

Sprinters delivered to Europe and Latin America may use either version, depending on country and year.

Complete your early model Sprinter project in style - whether its a retro-ride, drift machine, restoration project or street registered!

These lenses have been produced in Australia to highest quality and are faithful reproduction items.

We ship worldwide every day and can ship anywhere.

 

$260.00
1 In Stock
* usdm or jdm-rest of world:

Corolla E10 Series Front Bumper Bar Mount Rubber Seal

Faithful reproduction of rubber seals that fit between the bumper and the steel mounting brackets (front bumper) on all early model Corolla and Sprinters.

Sold as a pair.

These have been manufactured to the highest tooling and production standards to create a high quality precision faithful reproduction part.

We currently have these seals fitted to the Toyota Heritage KE17 Race Car. They stop vibration, reduce corrosion and simply finish off your car very nicely.

Suitable for all first generation Corolla and Sprinter - KE10, KE11, KE15, KE16, KE17 and KE18

$20.00
21 In Stock

Corolla Interior vent tag 1966 to 1970

All 1966 to 1970 models assembled in Japan, USA, Europe, Australian and New Zealand. Complete your early Toyota restoration project!

As used on KE10, KE11, KE15, KE16, KE17 and KE18 - Corolla, Sprinter and wagon.

These tags often lost or completely dissintegrated and are no longer available from TMC.

The tags were fitted to the vent control rod and described use and operation for the owner. They instruct the driver of the progressive stage opening of the vent to shift from fresh air to recirculated air.

Reproduced meticulously to original detail including print stock, text through to cord. One side in English and the reverse side in original Japanese (just like the originals in the 1960's).

Shipping world wide every week - no problems for international buyers.

$10.00

Corolla E10 Series script mud-guard (fender) badge

Pair of "Corolla" script badges that fits to your cars mud guard (fender).

These Australian made reproductions have been manufactured to the highest tooling and production standards to create a high quality precision faithful reproduction part.

Suitable for all first generation Corolla and Sprinter with a 'K' engine - KE10, KE11, KE15, KE16, KE17 and KE18.

Why bother with old badge restoration - our badges are leap ahead for your project with correct mounting pins and also with plating that will last a life time.

Worldwide shipping weekly - no problems for overseas buyers.

$120.00
14 In Stock