Genuine Eagle brand 5mm ignition leads to suit your Toyota Soarer fitted with a 1JZ-GTE engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 1JZ-GTE engines.

Suits 2.5L 1JZ-GTE DOHC 24V Soarer models as follows:

• JZZ30 Turbo

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 5mm ignition leads to suit your Toyota Soarer fitted with a 2JZ-GE engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 2JZ-GE engines.

Suits 3.0L 2JZ-GE DOHC 24V Soarer models as follows:

• JZZ31 (Sept 1997 onwards)

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Reproduction side marker lenses to suit your second generation W20 series Toyota MR2.

Available in clear, smoke or amber complete your SW20 MR2 project in style with these side marker (turn signal) lenses.

These lenses suit Rev 1 and Rev 2 MR2 built between 1989 and 1993.

Availbale in the following colours:

Custom colours:

• Clear
• Smoke

Original colours:

• Amber (JDM, Australia and 'rest of world')

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Clear and smoke colour lenses must be used with coloured bulbs. Product is a customisation part; seller does not warrant regulation compliance.

Shipping worldwide weekly - no problems for overseas buyers.

UK and Europe customers must contact Toyota Heritage prior to purchasing - This email address is being protected from spambots. You need JavaScript enabled to view it. 

Complete your second generation A40 or A50 Toyota Celica series B project in style!

Pair of corner parker lamp lenses for the late build A40 series Toyota Celica (1979-1981). Suits all late builds of TA40 TA45 TA41 TA42 TA46 TA47 RA40 RA45 RA46 RA42 RA43 MA45 MA46 MA47 MA55 and MA56

These lenses are reproductions are Australian made using the highest quality tooling and are faithful reproductions.

Replaces original parts Koito 14-87L (left side) and 14-87R (right side) and are fitted to the front corner of the mud-guard (fender).

Available in clear or amber - simply use the drop down menu to select your required lens colour.

Look great on a vintage restoration project, retro ride, drift mobile or just an every day driver.

Shipping worldwide every week - no problems for international buyers.

Reproduction front corner indicator parker lenses to suit your second generation A40 Toyota Celica series A (round headlights).

Suited to all TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA46, RA42 and RA43 Toyota Celica built between 1977 to 1979 these lenses have been made in Australia to the highest quality and replace Koito original product number Koito 14-61L (left side) and 14-61R (right side).

These lenses are fitted to the eraly build second generation A40 Celica with round headlights and are fitted to the front corner of the mud-guard (fender)..

Complete your 'old school' Toyota Celica project in style - whether its a retro-ride, drift car, street driver, restoration project or even race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction tail light lenses for your second generation S40 series Toyota Crown.

Suited to all Toyota Crown S40 series sedans built between 1965 to 1967 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number S11539L (left side) and S11539R (right side).

Suits all late build sedans including MS40, MS41 and MS45. Please see separate listing for wagon and ute (pick-up) variants of this tail light lens.

Complete your 'second gen' Toyota Crown project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction third brake light lens in smoke, clear or OEM factory red colour to suit your sixth generation T200 series Toyota Celica.

Suited to all Toyota Celica T200 series such as AT200 ST202 ST203 ST204 and ST205 built between 1993 to 1999 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part 20-367

These lenses were fitted to the tail gate of liftback variants and to the trunk (boot) lid of coupe and convertiable variants.

Select from custom clear or smoke or OEM factory red lenses - simply use the drop-down menu to select.

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Vendor does not warrant regulatory compliance of the custom colours of smoke and clear and owners must use a red bulb with these coloured lenses.

Shipping worldwide weekly - no problems for overseas buyers.

UK and Europe customers please make contact with Toyota Heritage (This email address is being protected from spambots. You need JavaScript enabled to view it.) prior to making purchase.

Reproduction clear or smoke side indicator lenses for your first generation W10 series Toyota MR2.

Suited to all USDM Toyota MR2 AW10 and AW11 built between 1984 to 1989 these lenses are wonderful custom clear or smoke reproductions made to the highest quality and replace original Koito part 17-5.

These lenses are fitted to the front fender of North American delivered Toyota MR2 and replace the traditionally amber or type lenses. Must be used with an amber bulb (supplied). Vendor does not warrant regulatory compliance. 

Complete your 'A-dub' first generation Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering - This email address is being protected from spambots. You need JavaScript enabled to view it. 

Shipping worldwide weekly - no problems for overseas buyers.