Reproduction valve clearance decal for Toyota models with 3K-B engines.

Suits 3K-B engined models as follows:

• Toyota Corolla KE11, KE17 and KE18 (SL variants only)
• Toyota Corolla KE20, KE25 and KE26V (Japan and Australia only)
• Toyota Corolla KE30 and KE35 (Japan and Australia).
• Toyota Starlet KP47 and KP50 (also known as Publica in some markets)

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction engine decal for Toyota models with 2T, 2T-B, 2T-C or 2T-G engines.

Suits 2T engined models as follows:

• Toyota Celica TA21, TA22
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30
• Toyota Corona TT100, TT106V, TT110 and TT120

Suits 2T-B engined models as follows:

• Toyota Celica TA28
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

 Suits 2T-C engined models as follows:

• Toyota Celica TA21, TA22
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

Suits 2T-G engined models as follows:

• Toyota Celica TA27 (1600GT versions)
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12 and TA17 (1600GT versions)

These decals were fitted from the factory to the cam-shaft cover or the timing chain inspection plate for twin cam versions.

Select the decal for your engine by using the drop down menu.

Our reproduction decals are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

• 2T-B engine decal 2T-B engine decal
• 2T-C engine decal 2T-C engine decal
• 2T-G engine decal 2T-G engine decal
•  

Reproduction front fender side marker lenses for your second generation A40 series or A50 series Toyota Celica GT or Toyota Celica GTV. 

Suited to all Toyota Celica GT and GTV such as RA40GT, RA45GT, RA55GT, TA40GT, TA45GT and Celica XX MA45 and MA55 built between 1977 to 1981 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part 14-63L (left side) and 14-63R (right side).

These lenses were are fitted to the fender (mud guard) of the Celica GT, Celica GTV and Celica XX liftback and coupe variants in both Series A (round headlights) and Series B (rectangular headlights). 

Select from custom clear or factory amber lenses - simply use the drop-down menu to select.

Complete your 'second gen' Toyota Celica project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Reduce weight transfer and improve handling and performance of your seventh generation Toyota Celica with Toyota Heritage roll centre adjusters.

Owners who have lowered their seventh generation Toyota Celica ZZT230 using adjustable coil overs may be experiencing increased roll and weight transfer when cornering. You can now adjust your roll centre back to the factory setting using Toyota Heritage roll centre adjusters and eliminate the increased roll caused through lowering your car.

Toyota Heritage GR Yaris roll centre adjusters are Australian made using high grade aluminium and are anodised to the highest standards and are suited to ZZT230 and ZZT231 model Toyota Celica.

The standard size roll centre adjuster we offer for the Toyota Celica ZZT230 or ZZT231 is 20mm. This is an ideal size suited to lowering your Toyota Celica ZZT230 or ZZT231 using coil overs and to the extent that does not require re-engineering of the tie-rod end ball joint at the steer knuckle.

For the series motorsport competitor Toyota Heritage can make custom sized roll centre adjusters to suit your Toyota Celica ZZT230 or ZZT231 - simply message us This email address is being protected from spambots. You need JavaScript enabled to view it.  . Our roll centre adjusters come complete with bolts, washers and nuts for simple fitment.

We ship worldwide weekly - no problems for overseas buyers.

Complete your early J20 series Toyota Land Cruiser restoration project in style with a reproduction Tire Pressure plate.

These Tire Presure Plates were fitted on the dash of all early model Toyota Land Cruisers built 1955 to 1960 including models such as the FJ25 and FJ28.

The Tire Pressure plate informed owners of correct tyre pressure over different surface types and often these plates have been damaged or lost through the vehicle being repainted at some time. 

Complete your 'J20 series' Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, restoration project or even a shop truck!

These plates have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your early J20 series Toyota Land Cruiser restoration project in style with a reproduction Gear Selection plate.

These Gear Selection plates were fitted on the dash of all early model Toyota Land Cruisers built 1955 to 1960 including models such as the FJ25 and FJ28.

The Gear Selection plate plate informed owners of correct gear level position for each gear and often these plates have been damaged or lost through the vehicle being repainted at some time. 

Complete your 'J20 series' Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, restoration project or even a shop truck!

These plates have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Reduce weight transfer and improve handling and performance of your Toyota GR Yaris (GXPA16) with Toyota Heritage roll centre adjusters.

Owners who have lowered their GR Yaris using adjustable coil overs may be experiencing increased roll and weight transfer when cornering. You can now adjust your roll centre back to the factory setting using Toyota Heritage roll centre adjusters and eliminate the increased roll caused through lowering your car.

Toyota Heritage GR Yaris roll centre adjusters are Australian made using high grade aluminium and are anodised to the highest standards.

The standard size roll centre adjuster we offer for the Toyota GR Yaris is 20mm. This is an ideal size suited to lowering your Toyota GR Yaris using coil overs and to the extent that does not require re-engineering of the tie-rod end ball joint at the steer knuckle.

For the series motorsport competitor Toyota Heritage can make custom sized roll centre adjusters to suit your GR Yaris - simply message us sThis email address is being protected from spambots. You need JavaScript enabled to view it. 
Our GR Yaris roll centre adjusters come complete with bolts, washers and nuts for simple fitment.

We ship worldwide weekly - no problems for overseas buyers.

Available for 2000GT Toyota models with 3M engine.

Suits various models including:

• MF10
• MF10L

These plates are unique to the 2000GT and in some cases they have degraded over time and lost their shine and print.

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data (head number) applied to the plate before we ship it to you.

We ship globally to all countries weekly. No problems for overseas buyers.